Support
Last updated · November 14, 2026
A question, a bug, an idea? Email us at support@koma.so, we usually reply within 48 hours. If you can, tell us your iPhone model, your iOS version and your camera model, and attach a screenshot.
Which cameras work?
Only the ✓ cells were tested by us. The rest follows Sony’s compatibility lists: the app uses the same protocols as Sony’s Imaging Edge Mobile app (“Send to Smartphone” transfer and geotagging) and as the RMT-P1BT Bluetooth remote. Recent cameras, moved to Creators’ App, no longer offer “Send to Smartphone”, so Wi-Fi transfer isn’t possible with them.
| Camera | Wi-Fi | GPS | Remote |
|---|---|---|---|
| Full frame | |||
| α7 II · α7R II · α7S IIILCE-7M2 · 7RM2 · 7SM2 | Should work | Not on this camera | Not on this camera |
| α7 IIIILCE-7M3Remote: camera system software 3.00 or later. | Tested | Tested | Tested |
| α7R III · α7R IIIAILCE-7RM3 · 7RM3ARemote: camera system software 3.00 or later. | Should work | Should work | Should work |
| α7R IV · α7R IVAILCE-7RM4 · 7RM4A | Should work | Should work | Should work |
| α7CILCE-7C | Should work | Should work | Should work |
| α9ILCE-9Remote: camera system software up to date. | Should work | Should work | Should work |
| α9 IIILCE-9M2 | Should work | Should work | Should work |
| α7S IIIILCE-7SM3 | before 3.00 | before 3.00 | Should work |
| α1ILCE-1 | before 2.00 | before 2.00 | Should work |
| α7 IVILCE-7M4 | before 2.00 | before 2.00 | Should work |
| α7R VILCE-7RM5 | before 2.00 | before 2.00 | Should work |
| α7C II · α7CRILCE-7CM2 · 7CR | Not supported | Not checked | Should work |
| α9 III · α1 II · α7R VIILCE-9M3 · 1M2 · 7RM6 | Not supported | Not checked | Should work |
| α7 VILCE-7M5 | Not supported | Not checked | Not checked |
| APS-C | |||
| α5100 · α6000 · α6300ILCE-5100 · 6000 · 6300 | Should work | Not on this camera | Not on this camera |
| α6500ILCE-6500 | Should work | Should work | Not on this camera |
| α6100 · α6400 · α6600ILCE-6100 · 6400 · 6600Remote: camera system software 2.00 or later (α6400, RX0 II). | Should work | Should work | Should work |
| α6700ILCE-6700 | Not supported | Not checked | Should work |
| ZV | |||
| ZV-E10 · ZV-1ZV-E10 · ZV-1 | Should work | Should work | Should work |
| ZV-E10 II · ZV-E1ZV-E10M2 · ZV-E1 | Not supported | Not checked | Should work |
| ZV-1 II · ZV-1FZV-1M2 · ZV-1F | Not supported | Not checked | Should work |
| Compacts | |||
| RX100 VI · RX10 IVDSC-RX100M6 · RX10M4 | Should work | Should work | Not on this camera |
| RX100 VIIDSC-RX100M7 | Should work | Should work | Should work |
| RX0 IIDSC-RX0M2Remote: camera system software 2.00 or later (α6400, RX0 II). | Should work | Should work | Should work |
✓ tested · ● should work · ✕ not supported · — not on this camera · ? not checked. “before 2.00”: only if the camera’s system software is older than that version. After the update, the camera moves to Creators’ App. The version is shown in the camera’s Setup menu, under Version.
USB cable: should work with all these cameras, with “USB Connection” set to MTP (not tested yet).
Your camera isn’t in the grid, or a cell is wrong? Email us at support@koma.so.
Connecting the camera over Wi-Fi
On the camera, start “Send to Smartphone” (Network menu), then “Select on Smartphone”. In the app, scan the QR code shown or pick the camera’s Wi-Fi. After that, the app connects on its own as soon as the camera answers.
The app can’t find the camera
- Check that the camera shows the “Send to Smartphone” screen.
- Check that the iPhone joined the camera’s Wi-Fi (its name starts with DIRECT-).
- Allow local network access: iOS Settings → Alpha Companion → Local Network.
What about RAW files?
Over Wi-Fi, the camera only sends JPEGs and videos. For RAW files, plug it in with a USB cable, with USB Connection set to MTP. With a Lightning iPhone, you need Apple’s Lightning to USB 3 Camera Adapter.
Geotagging photos
In the GPS tab, pair the camera, then turn on “Location Info. Link” on the camera. On most bodies, this link and the Bluetooth remote can’t run at the same time: while the remote is in use, the iPhone records a GPS track and places the photos when importing.
Remote and timelapse
Turn on “Bluetooth Rmt Ctrl” on the camera. While the remote is linked, the Lock Screen keeps a Shoot button. The intervalometer fires at a set interval, then the app edits the video from the imported photos.
Deleting my data
Everything is stored on your iPhone: deleting the app erases it all. In the Profile tab, you can also forget the import history. See also our privacy policy.